804 Faucet
- Lead‑free brass body — built for long‑lasting performance.
- AB‑1953 compliant — certified lead‑free for safe drinking water.
- Arc spout — sleek reach that clears bottles and pitchers.
- Chrome finish — polished, easy‑clean look for modern kitchens.
- Side‑to‑side handle — ergonomic lever movement for smooth flow control.
- Non‑air gap design — under‑sink RO & filtration compatible (where code allows).
- Single‑hole mount — clean, minimal installation on sink or counter.
- Includes washer set — everything you need for a secure install.
Made In USA
Secure Checkout
Durable & Long Lasting
804 Drinking Water Faucet
Chrome, arc spout, side‑to‑side handle — AB‑1953 lead‑free, non‑air gap
The 804 is a custom‑designed, lead‑free brass faucet built for long‑lasting performance and a modern look. Its sleek arc spout and polished chrome finish pair with most under‑sink filtration and RO systems. The distinctive side‑to‑side handle offers smooth, ergonomic control compared to traditional up‑and‑down levers.
- AB‑1953 compliant — certified lead‑free brass for safe drinking water.
- Side‑to‑side handle — ergonomic lever movement for fine flow control.
- Non‑air gap design — compatible with RO & filtration systems (where code allows).
- Arc spout — slim profile with comfortable reach.
- Single‑hole mount — clean install on sinks/countertops.
- Includes washer set — components needed for a quick, secure install.
- Chrome finish — timeless, easy‑clean appearance.
- Under‑sink compatible — designed to pair with our filtration units.
Professional plumber installation recommended. Use cold filtered water only.
Made in California. AB‑1953 Lead‑Free Compliant.
We build our drinking‑water faucets to meet California’s strict requirements first — so you’re covered anywhere in the U.S.
Made in California
CNC‑machined and assembled in our California facility for precision and consistency.
AB‑1953 Lead‑Free
Certified compliance with California’s lead‑free law for materials in contact with drinking water.
Built to Stricter Standards
Designed for California’s rigorous rules, meeting or exceeding typical national requirements and common international norms.
Note: Compliance and certification refer to applicable California regulations (AB‑1953). Always follow your local plumbing codes and installer guidance.
Made in the USA — Inside Our Water Filtration Factory
CNC‑precision, AB‑1953 lead‑free components. Since 1994.
Welcome to AlkaVida. This video was filmed on our production floor where CNC machines cut faucet parts from U.S.‑sourced metals to meet AB‑1953 lead‑free requirements. We pair long‑serving, legacy machines with the latest equipment to bring new ideas to life in the water filtration space — all under one roof in California.
- In‑house CNC machining for faucet components.
- AB‑1953 compliant processes using U.S.‑sourced materials.
- Injection molding for filters and durable housings.
- Operating since 1994
Our products are used worldwide — including in Australia, Japan, and the Middle East — spanning drinking water systems, shower filters, and compatible housings. The same focus you see here on precision and reliability is what you’ll find in every AlkaVida faucet and filter we ship.
From our customers
804 Faucet — FAQs
Answers about the 804 Lead‑Free Brass Faucet with arc spout, polished chrome finish, side‑to‑side handle, and non‑air gap design.
What makes the 804 different?
The 804 is a custom drinking‑water faucet in lead‑free brass with a polished chrome finish. Its side‑to‑side handle delivers smooth, ergonomic control compared to typical up/down levers.
Is it AB‑1953 compliant?
Yes—AB‑1953 lead‑free compliant for materials contacting drinking water.
Is this an air‑gap faucet?
No—804 is a non‑air gap faucet, ideal where local code does not require an air‑gap. If an air‑gap is required, choose an air‑gap model.
How does it mount and what’s included?
Single‑hole mount on sink/countertop using the included washer set for a clean, secure install.
What opening/tubing does it use?
Fits a typical accessory hole with a ½″ shank opening. Systems commonly connect with ¼″ compression tubing—verify adapters with your filtration/RO manual.
Which systems is it compatible with?
Compatible with most under‑sink filtration and reverse osmosis systems using ¼″ lines. Non‑air gap design—confirm local code.
Can I orient the side‑to‑side handle left or right?
Yes—during install, the faucet can be positioned so the lever sweeps in the direction you prefer (left‑to‑right or right‑to‑left) before tightening the mounting hardware.
Can I use hot water through it?
No. Use cold filtered water only to protect internal seals and filtration media.
Materials, finish, spout, and handle?
Material: Lead‑free brass • Finish: Chrome • Spout: Arc spout • Handle: Side‑to‑side lever
Does the spout swivel?
Yes — 360° swivel for easy positioning over glasses, bottles, and pitchers.
What flow should I expect?
Tuned for a smooth, steady stream. Actual flow depends on your upstream system (tank pressure, tubing length, filter condition).
Cleaning and finish care?
Wipe with a soft cloth and mild soap; rinse and dry. Avoid abrasives and harsh chemicals that may dull the chrome finish or damage seals.
Is there a warranty?
Covered by a limited manufacturer warranty on materials and workmanship. Contact support for full policy details.
Handle feels stiff or misaligned.
Loosen the mounting nut slightly and realign the faucet so the side‑to‑side sweep is unobstructed, then retighten. Check that the washers are seated correctly and the countertop isn’t pinching the base.
Flow seems low — what should I check?
Inspect for kinked tubing, verify filter/tank pressure (for RO), and ensure adapters are fully seated. Flush the system after maintenance.
Drip after shut‑off?
A brief residual drip can be normal as pressure equalizes. Persistent drip may indicate debris at the valve seat—flush lines and service upstream filters if needed.
Notes: Always follow local plumbing code (air‑gap requirements may apply). Specs and performance depend on your filtration/RO system and water conditions.